Methods for testing solutions for injection in the channels of pre-stressed reinforced concrete structures

Number: Issue 12(2010)
Section: Without a section
The page spacing of the article: 10-15
Keywords: bridges, pre-stressed concrete reinforced structures, leading reinforcement bars, solutions for injection.
How to quote an article: Igor Babyak, Tetyana Tereshchenko Methods for testing solutions for injection in the channels of pre-stressed reinforced concrete structures. Dorogi і mosti [Roads and bridges]. Kyiv, 2010. 12. P. 10-15 [in Ukrainian]


M.P. Shulgin State Road Research Institute State Enterprise - DerzhdorNDI SE, Kyiv, Ukraine
M.P. Shulgin State Road Research Institute State Enterprise, Kyiv, Ukraina


The article deals with the requirements of standards of different national standardization systems regarding solutions for injection in the channels of pre-stressed reinforced concrete structures and test methods for such solutions.


1. BS EN 445:2007. Grout for prestressing tendons. Test methods.
2. BS EN 446:2007. Grout for prestressing tendons. Grouting procedures.
3. BS EN 447:2007. Grout for prestressing tendons. Basic requirements.
4. Grouting of tendons in prestressed concrete. FIP Guide to Good Practice. – Federation Internationale de la Precontrainte (FIP), Thomas Telford, London, 1990. – 117 р.
5. Specification for Grouting of Post-Tensioned Structures. Guide Specification. – Post-Tensioning Institute (PTI), Phoenix, Arizona, 2001. – 76 р.
6. ДБН В.2.3-20-2008. Споруди транспорту. Мости та труби. Виконання та приймання робіт.
7. ASTM C940-10. Standard Test Method for Expansion and Bleeding of Freshly Mixed Grouts for Preplaced-Aggregate Concrete in the Laboratory.
8. Schokker, A. J., Hamilton, H.R., Schupak, M. Estimating Post-Tensioning Bleed Resistance Using a Pressure-Filter Test // PCI Journal. – 2002. №2. – P. 32-39.
9. ASTM C 1090-10. Standard Test Method for Measuring Changes in Height of Cylindrical Specimens of Hydraulic-Cement Grout.
10. ASTM C 939-10. Standard Test Method for Flow of Grout for Preplaced-Aggregate Concrete (Flow Cone Method).
11. ASTM C185. Standard Test Method for Air Content of Hydraulic Cement Mortar.
12. API Recommended Practice 13B-1: Standard Procedures for Field Testing Water-Based Drilling Fluids.
13. 5 VSL report series: Grouting of post-tensioning tendons – VSL International LTD, Shwitzerland, 2002. – 46 p.
14. Schokker, A. J., Koester, B. D., Breen, J. E., Kreger, M. E. Development of high performance grouts for bonded post-tensioned structures. Research report 1405-2. – Center for transportation research. Bureau of engineering research. The University of Texas at Austin, 1999. – 69 p.
15. ДСТУ EN 196-3:2007. Методи випробування цементу. Частина 3. Визначення строків тужавіння та рівномірності зміни об'єму.
16. ДСТУ Б В.2.7-114-2002 (ГОСТ 10181-2000). Будівельні матеріали. Суміші бетонні. Методи випробувань.
17. ГОСТ 5802-86. Растворы строительные. Методы испытаний.
18. ДСТУ Б В.2.7-187:2009. Будівельні матеріали. Цементи. Методи визначення міцності на згин і стиск.
19. ДСТУ Б В.2.7-216:2009. Будівельні матеріали. Бетони. Методи визначення деформацій усадки та повзучості.